Utilize a Pneumatic Forklift
You could normally find pneumatic forklifts in shipping and warehouse operations. Also called pallet trucks or pump trucks, they are utilized to move supplies and products around on wooden pallets utilizing metal forks mounted on a wheeled counterweight. The counterweight has a pump that lifts the forks off the ground. A pallet truck is designed to be operated by one individual.
Pallet trucks should be operated carefully to avoid loss of control while raising heavy loads. Machine should be checked prior to operating. Clear the wheels area of any obstacle. Make certain that the handle smoothly turns. The pallet should be carefully stacked to ensure that nothing will fall off during transportation.
On the end of the pallet truck's handle, squeeze the level found on the inside of the metal loop to release the air in the pump and lower the forks. The forks can then be pushed into the slots of the pallet. The forks should be at the center to ensure even distribution of the pallet's weight across them. Lift the forks from the ground by pumping the handle of the pneumatic lift until the pallet has fully cleared the ground. Do not raise the pallet too high or the forklift could unbalance.
Move the pallet by pulling on the handle and dragging it behind you. It is really dangerous to push the pallet ahead of you as the momentum could cause it to lose control. Take turns slowly and don't attempt to stop suddenly. Stop slowly, squeeze the lever, and the forks will lower to the ground. Finally, remove the forks from the pallet by pulling them out. Return the pallet truck to its permanent location.